The 7-Step Pre-Press Checklist I Run Before Any Print or Packaging Order Ships
- 1. Lock the trim size and substrate before anything else
- 2. Calculate resolution from final output sizeānot the other way around
- 3. Verify color targets with numbers, not vibes
- 4. Check structural and dimensional tolerancesāpackaging especially
- 5. Approve from a physical sample, not a screen
- 6. Specify packaging and shipping explicitly
- 7. Buy certainty on rush ordersāknow what you're paying for
- Common mistakes (and what to do instead)
I review roughly 200 print and packaging jobs per year across our North America operations. In 2024, I rejected about 15% of first deliveries before they reached a customer. Most of those rejections were preventableānot because vendors were incompetent, but because a spec wasn't locked before the press started running.
Here's the checklist I use. Seven steps, in order. It applies to greiner tubes headed to a lab in Monroe, NC, business cards for a trade show, or custom packaging for a product launch. The steps don't change with the product. The tolerances do.
1. Lock the trim size and substrate before anything else
This sounds obvious. It isn't. "Standard business card" means different things in different markets:
- US standard: 3.5 Ć 2 inches
- European standard: 85 Ć 55 mm (3.35 Ć 2.17 inches)
- Japanese standard: 91 Ć 55 mm
If you're ordering for an international sales team, specify which standard. Otherwise your batch fits nobody's cardholder.
Substrate matters just as much. A 20lb bond sheet (75 gsm) and an 80lb cover stock (216 gsm) are not interchangeableānot for printing, not for folding, not for how the customer perceives the quality. When we specify packaging for greiner tubes, wall thickness and resin grade are part of the spec sheet. Print materials deserve the same treatment.
"80 lb cover = 216 gsm" is the closest thing to a universal business card weight. For heavier stock, 100 lb cover (270 gsm) is the next step up. Note: conversions are approximate. Ask for a physical sample.
2. Calculate resolution from final output sizeānot the other way around
Print size is a function of pixel dimensions and DPI. The formula is simple:
Print size (inches) = Pixel dimensions Ć· DPI
A 3000 Ć 2000 pixel image at 300 DPI gives you a maximum of 10 Ć 6.67 inches. Commercial offset printing requires 300 DPI at final size. Large format posters viewed from a distance can get away with 150 DPI. Newsprint drops to 170ā200 DPI. These are industry-standard minimums, not suggestions.
Where this goes wrong: someone grabs a hero image from the web, drops it into a summer league poster layout, and stretches it to 24 Ć 36 inches. It looks acceptable on a 27-inch monitor. On press, the pixels are visible from across the room.
Do the math before the file goes to prepress. Two minutes of calculation saves a four-figure reprint. Not ideal, but workableāif you catch it early.
3. Verify color targets with numbers, not vibes
"Looks a little different" is not a rejection criterion. Delta E is.
Industry standard for brand-critical colors is Delta E < 2. A Delta E of 2ā4 is noticeable to trained observers. Above 4 is visible to most people. That's per the Pantone Color Matching System guidelines, and it's the threshold we use before approving any color-critical printātube labels, packaging inserts, brand collateral.
Pantone-to-CMYK conversion adds another layer. Pantone 286 C (a common corporate blue) converts to approximately C:100 M:66 Y:0 K:2. But the printed result shifts based on substrate and press calibration. The Color Bridge guide exists because this conversion is approximate, not exact.
Look, screens lie. A calibrated monitor gets you close. A physical press proof under D50 or D65 lighting gets you confirmation. We don't approve color from a PDF. Ever.
4. Check structural and dimensional tolerancesāpackaging especially
For greiner tubes and plastic containers, wall thickness, cap diameter, and closure torque are not cosmetic choices. They're functional specs. If they're off, the product fails at the filling line, the lid leaks, or the sample arrives damaged.
We learned that the hard way. A batch of tube caps came in with the outer diameter 0.3mm off spec. The vendor called it "within industry standard tolerance." Normal for them, maybe. Our capping machine disagreed.
We removed that batch from production. The vendor redid it at their cost. Now every contract includes dimensional checks at incoming inspectionānot just visual review. (Note to self: add wall-thickness verification to the Q1 audit sheetāstill haven't done that.)
5. Approve from a physical sample, not a screen
A PDF on a monitor is a preview, not a proof. Submit a physical sample under the right lighting and check:
- Ink density and consistency across the sheet
- Fold lines and trim accuracy
- How the substrate handles the ink (coated vs. uncoated behaves differently)
- Whether the assembled piece looks rightānot just the flat sheet
For packaging, assemble it. Put product in it. Close the lid. Stack a few units. The flat print can be perfect and the assembled structure can still be wrong. That's the test that matters.
6. Specify packaging and shipping explicitly
"Wrapped in paper" is not a specification. What weight of paper? Which side faces out? Is it moisture-resistant? Does it need a barrier layer?
For lab consumables like greiner bio-one products, the packaging spec often includes sterility barriers, double-bagging, and desiccant. For commercial print, it might be kraft paper interleaving or shrink wrap. The point is to write it down. Vague instructions produce vague results.
I've seen shipments arrive damaged because someone interpreted "as wrapping paper" to mean "protected." It means "covered." Not the same thing. (Which, honestly, felt excessive the first time I read the damage report.)
7. Buy certainty on rush ordersāknow what you're paying for
Why do rush fees exist? Because unpredictable demand is expensive to accommodate. A vendor reshuffles schedules, dedicates staff, and absorbs the risk of a disrupted workflow. The fee isn't just for "faster." It's for certainty.
From the outside, it looks like rush orders are just normal orders moving faster. The reality is they often require completely different workflows and dedicated resources. A vendor that promises "probably on time" is offering you an estimate. A vendor that commits to a guaranteed date is offering you a different product.
In March 2024, we paid $400 extra for guaranteed delivery on a packaging run. The alternative was missing a $15,000 event. After getting burned twice by "it should ship Friday" promises that became "Monday, maybe," we now budget for guaranteed delivery on anything deadline-critical.
The cheapest option is often the one that arrives last. In a deadline situation, "cheap" stops being relevant.
Common mistakes (and what to do instead)
- Assuming "industry standard" means "our standard." Ask for the actual number. Then check it against your requirements.
- Approving from a screen. Screens lie. Physical proofs don't.
- Treating rush orders as a speed problem. They're a certainty problem. Pay for certainty or accept the risk.
- Skipping the substrate check. Same artwork, different paper, different result.
- Forgetting to write down the shipping spec. "Standard packing" means nothing. Be specific.
This checklist is what works for our operationāmid-size B2B, predictable volumes, mostly domestic logistics. If you're running international supply chains or dealing with seasonal demand spikes, some of these thresholds may need adjusting. Your mileage may vary.
It took me four years and about 300 batches to understand that the checklist isn't about catching mistakes. It's about making sure the mistakes never get a chance to happen.
Transform Your Enterprise Printing
Let our printing specialists help you reduce costs and improve efficiency with a customized optimization strategy.
Contact Our Team